Printronix t8000 Administrator's Manual page 199

Network > WLAN> IP Address
This item allows you to set the IP Address for the TCP/IP protocol using a
virtual keyboard. Make sure you enter the complete IP address, including the
period symbol between the segments.
Structure Seg1.Seg2.Seg3.Seg4
Factory Default 000.000.000.000
Disable BootP, ARP or DHCP before trying to
IMPORTANT
change the IP address.
If changed, the printer reboots when it is placed
IMPORTANT
ONLINE.
Network > WLAN> Subnet Mask
This item allows you to set the Subnet Mask for the TCP/IP protocol using a
virtual keyboard. Make sure you enter the complete mask, including the
period symbol between the segments.
Structure Seg1.Seg2.Seg3.Seg4
Factory Default 000.000.000.000
Disable BootP, ARP or DHCP before trying to
IMPORTANT
change the subnet mask.
If the printer has not rebooted after disabling
IMPORTANT
BootP, ARP or DHCP then the value shown is not
the static value. You MUST save this value or it will
be lost when the printer is rebooted.
If changed, the printer reboots when it is placed
IMPORTANT
ONLINE.
199