Printronix t8000 Administrator's Manual page 133

Application > PGL Setup > Forms Handling
This submenu allows the user to handle the form in various ways.
Disable Standard behavior.
Automatically ejects a page at the end of the job to spill
Auto Eject
out the last page.
Automatically does a form feed (FF) at the end of each
Auto TOF
form to the next top of form.
Factory Default Disable
Application > PGL Setup > PGL Normal
This option determines whether PGL passes the text data in Normal mode
according to LP+ or whether PGL will print the text data itself.
PGL will pass the text data to LP+ only in the default
LP+ Menu setting state (6 LPI, default character set, and font
attribute).
PGL Menu PGL will always print the text data itself.
Factory Default LP+ Menu
Application > PGL Setup > UPC Descenders
This parameter allows you to print bar code descenders when human
readable data is not presented in the UPC/EAN bar codes.
UPC/EAN bar codes are printed with descenders,
Always
even if there is no human readable data.
UPC/EAN bar codes are printed without descenders if
Never
the PDF command is present.
UPC/EAN bar codes are printed with descenders only
Only with PDF
when the PDF command is presented.
Factory Default Always
133