Printronix t8000 Administrator's Manual page 132

This parameter instructs the IGP to ignore the character selected under the
Select Character menu.
Disable
Enable
Factory Default
Instructs the IGP which decimal character (0-255) to ignore from the host.
Minimum
Maximum
Factory Default
Determines whether the printer, with media already set at the TOF (Top-of-
Form) position, will advance media to the next TOF position upon receipt of
an FF command.
Disable
Enable
Factory Default
This parameter forces the output to correspond with IGP-100 line matrix
printer output in cases where there are differences.
Disable
Enable
Factory Default
132
Application > PGL Setup > Ignore Mode
The IGP does not ignore any characters.
The IGP ignores the character specified in the Select
Char menu.
Disable
Application > PGL Setup > Select Char
0
255
0
Application > PGL Setup > Do FF at TOF
The printer will not advance media from the present
TOF position to the next TOF position upon receipt of
an FF command.
The printer will advance media from the present TOF
position to the next TOF position upon receipt of an FF
command, causing a blank form.
Enable
Application > PGL Setup > IGP100 Compatbl.
In areas of conflict, the printer will be compatible with
legacy thermal products (best behavior).
The printer will match compatibility in all ways with
legacy line matrix products.
Disable