Specifying A Power-Up Configuration; Modifying A Saved Configuration; Viewing The Current Configuration; Printing A Configuration - Printronix t8000 Administrator's Manual

Specifying a Power-Up Configuration

You can specify any one of the nine configurations (1-8 or Factory) as the power-up configuration using the
Configs > Control > Power-Up Config menu. If the selected configuration has not been saved, the user will
be warned with a "CONFIG DOES NOT EXIST" message on the panel.

Modifying a Saved Configuration

Configurations can be modified and saved (updated) as often as desired. You can load a configuration of
choice with Configs > Control > Load Config, change the menu or configuration parameter of interest and
either use the Auto Save feature or return to the Configs > Control > Save Config menu to save the
changes.

Viewing the Current Configuration

The Current Configuration can be easily viewed on the control panel by selecting the RIGHT SOFT key
labeled "Info" on the Home screen. This will provide the same information in a Configuration Printout
except it is viewable on the control panel.
As can be seen from the picture, the user can scroll through the configuration values and choose to print
the configuration using the RIGHT SOFT key labelled "Print".

Printing a Configuration

We recommend that you print and store all saved configurations for future reference. The printout provides
a list of the parameters that were set when you configured the printer. Configuration can be printed using
the Configs > Control > Print Config menu. That menu has the following options:
•
Current (the default)
•
Factory
•
Power-Up
•
All
•
Saved Configurations 1-8
57