Network; Network > Control - Printronix t8000 Administrator's Manual

Hide thumbs Also See for t8000:

Table of Contents

Network

For detailed information about using the NIC, refer to the Network Interface

Card User's Manual.

Network > Control

This option allows you to set the port number for ASCII print jobs. The data

port number needs to match your host system setting.

Factory Default

This is the time that the Keep Alive Timer will run. Keep in mind that with the

Keep Alive Timer on, the TCP connection will stay connected even after the

print job has terminated if the host system does not close the connection.

Factory Default

Network > Control > ASCII Data Port

Network > Control > Keep Alive Timer