Printronix t8000 Administrator's Manual page 74

Media Handling is set to Tear-Off Strip or Continuous (Tear Strip Full):
Label Wait Time specifies the number of seconds after printing stops that the
printer will wait before it advances media to the tear bar position.
Media Handling is set to Peel-Off, Tear-Off:
Label Wait Time specifies the number of seconds the printer will wait after a
label is removed from the peel/tear bar before starting to print the next label.
Minimum
Maximum
Factory Default
74
MEDIA > Handling > Label Wait Time
0.1 seconds
60.0 seconds
0.1 seconds