Host IO > Serial > Framing Errors
These are possible errors that can occur when serial interface settings of the
printer do not match those of the host computer. This menu determines
whether this error is shown on the control panel.
Disable
Feature disabled.
If a framing error occurs, a fault message will display
Enable
on the control panel.
Factory Default
Enable
Host IO > Serial > Offline Process
Same as Host IO > Centronics > Offline Process.
Host IO > Serial > Report Status
Same as Host IO > Centronics > Report Status.
Host IO > Serial > Trickle Time
Same as Host IO > Centronics > Trickle Time
Host IO > Serial > AutoSW Timeout
Same as Host IO > Centronics > AutoSW Timeout
193