Printronix t8000 Administrator's Manual page 169

Application > Serial Matrix Setup > Control Code 06
Control Code 06 defines the function of ASCII code 06 hex (ACK). You can
select an alternate line spacing of 6.0, 8.0, or 10.3 LPI.
Selections 6.0, 8.0, or 10.3 LPI
Factory Default 8.0 LPI
Application > Serial Matrix Setup > Overstrike
Overstrike determines the action required when a line is printed over a
previous line because a carriage return was received without a line feed.
Replaces the characters from the first line with the
Disable
second line.
Prints the second line on top of the first line making it
Enable
bolder.
Factory Default Enable
Application > Serial Matrix Setup > Printer Select
Determines if control codes DC1 and DC3 will ignored or used to disable or
enable the printer, respectively.
Disable Ignores the ASCII DC1 and DC3 control codes.
Disables the printer when control code DC1 is received
Enable
and enables the printer when DC3 is received.
Factory Default Disable
Application > Serial Matrix Setup > Alt. Set 80-9F
Determines how data in the range 80 hex – 9F hex will be treated.
Control Code Interprets as a control code.
Printable Prints data in this range.
Factory Default Control Code.
169