Tools > About - Printronix t8000 Administrator's Manual

Displays the length of media actually printed since the last Reset Head Data
operation. This value is set to zero at the factory.
Displays the percent of life left in the print head. The X will be either
Standard for a standard life head or Durable for a durable head.
Tools > About
All of the menus shown here are read-only.
Displays the Controller board version.
Displays the printhead type installed in dots per inch (203 dpi or 300 dpi).
Displays the total FLASH memory installed (128 MB).
Displays the total DRAM memory installed (512 MB).
Displays the current speed of the main processor.
Displays the printer firmware version and part number.
Displays the validator firmware version and part number (if installed).
216
Tools > Statistics > Head Print Dist
Tools > Statistics > Head Life (X)
Tools > About > Controller Board Version
Tools > About > Head DPI
Tools > About > FLASH Installed
Tools > About > DRAM Installed
Tools > About > CPU Clock
Tools > About > Printer F/W
Tools > About > Validator F/W