Fx2N-8Eyt, Fx2N-16Eyt And Fx2N-16Eyt-C (Transistor Output); Product Specifications - Mitsubishi FX3U-?*MR/ES User Manual

FX Series Programmable Controllers
3U
User's Manual - Hardware Edition
16.11 FX -8EYT, FX
2N

16.11.1 Product specifications

The generic specifications are identical to the main unit specifications.
For external wiring, refer to the following chapter.
1. Power supply specifications
Item
Product type
Rated voltage
2. Weight and Other spesifications
Item
MASS (Weight)
Other
3. Output specifications (Transistor output type)
Item
Output points
Connection unit
Output unit/type
External power supply
Output circuit insulation method
Indication of output operation
Maximum load
Open circuit leakage current
Minimum load
Response time
Output circuit diagram
346
-16EYT and FX
2N
FX -8EYT
2N
FX
24V DC (supplied from main unit and input/output powered extension unit)
FX -8EYT
2N
0.2 kg (0.44lbs)
• The extension cable is already connected to the extension block.
• Accessories: Label for indication of input/output number
• The DIN46277 rail (width: 35 mm (1.38")) or direct installation.
FX -8EYT
2N
8 points
Vertical terminal block (M3 screws)
Activation of the photo-coupler will light the LED indicator lamp on panel.
The total load current per common
Resistance
should be as follows:
load
• 4 output points/common: 0.8A or less
• 8 output points/common: 1.6A or less
Inductive load
OFF→ON
ON→OFF
Load
Fuse
DC power
supply unit
Fuse
DC power
supply unit
16 FX2N-8/16E*-*(Input/Output Extension Blocks)

16.11 FX2N-8EYT, FX2N-16EYT and FX2N-16EYT-C (Transistor Output)

-16EYT-C (Transistor Output)
2N
→ Refer to Section 4.1 for generic specifications.
→ Refer to Chapter 12 for output wiring.
FX -16EYT
2N
extension block
2N
FX -16EYT
2N
FX -16EYT
2N
Transistor/sink output
5 to 30V DC
Photo-coupler insulation
0.5 A/point
12 W/24V DC
0.1 mA/30 A DC
0.2 ms or less for 200 mA (at 24V DC)
0.2 ms or less for 200 mA (at 24V DC)
Y
COM1
Y
COM2
FX -16EYT-C
2N
FX connector type extension block
2N
FX -16EYT-C
2N
0.3 kg (0.66lbs)
FX -16EYT-C
2N
16 points
Connector terminal block
0.3 A/point
The total load current per common
should be as follows:
• 16 output points/common: 1.6A or
less
7.2 W/24V DC
−
Load
Y
Fuse
COM
DC power
supply unit
Y
Fuse
COM
DC power
supply unit