Radwin 2000 C PLUS User Manual page 89

Changing the Link Band
7. Click OK. A link re‐sync follows. Here is the final result:
Having set the channel bandwidth and operating channels earlier, there is no need
for deactivation and reactivation.
You may also add new Bands by clicking the Add Bands button. There are several provisos to
this:
• Additional Bands must be available for your hardware
• Such additional Bands must be available within the framework of your local regulations
The foregoing applies to both regulated and unregulated Bands.

To obtain and install additional bands:
1. As Installer, open the window of Figure
ing instruction panel is displayed:
RADWIN 2000 C Plus User Manual
6‐15 above, and click Add Bands. The follow‐
Release 3.5.70
Chapter 6
6‐27