Chapter 8:
Operating Under the FCC
Unrestricted Contention Based
Protocol
Scope of this Chapter
This chapter explains how to set up a RADWIN 5000 link operating under the FCC Unrestricted
Contention Based Protocol (UCBP) in the 3.650‐3.7GHz band The detailed technical operation
of the protocol is beyond the scope of this manual. A variety of publications on the subject
are available from the relevant FCC Web site, http://wireless.fcc.gov/services/
index.htm?job=service_home&id=3650_3700. See also, http://hraunfoss.fcc.gov/
edocs_public/attachmatch/FCC‐05‐56A1.pdf.
Bringing up a link
The HBS for FCC UCBP is pre‐configured for this regulation only. Activation is the same as for
other RADWIN 5000 products. Following activation, the HBS will find its HSUs in the usual
way.The only additional requirements are two extra parameters to be set in the Configuration
Air Interface tab:
RADWIN 2000 C Plus User Manual
Release 3.5.70
8‐1
Need help?
Do you have a question about the 2000 C PLUS and is the answer not in the manual?