Private MIB Parameters
Table C‐2: Private MIB Parameters (Sheet 12 of 32)
Name
winlink1000OduAirSpectrumChann
elScanned
winlink1000OduAirSpectrumChann
elScanningTimestamp
winlink1000OduAirSpectrumChann
elLastNFAntennaA
winlink1000OduAirSpectrumChann
elLastNFAntennaB
winlink1000OduAirSpectrumChann
elAverageNFAntennaA
winlink1000OduAirSpectrumChann
elAverageNFAntennaB
winlink1000OduAirSpectrumChann
elMaxNFAntennaA
winlink1000OduAirSpectrumChann
elMaxNFAntennaB
winlink1000OduAirSpectrumChann
elCACPerformed
winlink1000OduAirSpectrumChann
elLastCACTimestamp
winlink1000OduAirSpectrumChann
elRadarDetected
winlink1000OduAirSpectrumChann
elRadarDetectionTimestamp
winlink1000OduAirSpectrumChann
elAvailable
winlink1000OduAirSpectrumChann
elMaxBeaconRss
winlink1000OduAirSpectrumChann
elCompressed
winlink1000OduAirChipMinMaxFre
q
winlink1000OduAirSpectrumAnalysi
sTimeout
winlink1000OduAirAntConfAndRate
sStatus
winlink1000OduAirDualAntTxMode 1.3.6.1.4.1.4458.1000.1.5.5
RADWIN 2000 C Plus User Manual
OID
Type
1.3.6.1.4.1.4458.1000.1.5.5
Integer
6.5.1.3
1.3.6.1.4.1.4458.1000.1.5.5
TimeTicks
6.5.1.4
1.3.6.1.4.1.4458.1000.1.5.5
Integer
6.5.1.5
1.3.6.1.4.1.4458.1000.1.5.5
Integer
6.5.1.6
1.3.6.1.4.1.4458.1000.1.5.5
Integer
6.5.1.7
1.3.6.1.4.1.4458.1000.1.5.5
Integer
6.5.1.8
1.3.6.1.4.1.4458.1000.1.5.5
Integer
6.5.1.9
1.3.6.1.4.1.4458.1000.1.5.5
Integer
6.5.1.10
1.3.6.1.4.1.4458.1000.1.5.5
Integer
6.5.1.11
1.3.6.1.4.1.4458.1000.1.5.5
TimeTicks
6.5.1.12
1.3.6.1.4.1.4458.1000.1.5.5
Integer
6.5.1.13
1.3.6.1.4.1.4458.1000.1.5.5
TimeTicks
6.5.1.14
1.3.6.1.4.1.4458.1000.1.5.5
Integer
6.5.1.15
1.3.6.1.4.1.4458.1000.1.5.5
Integer
6.5.1.16
1.3.6.1.4.1.4458.1000.1.5.5
OctetString
6.5.1.17
1.3.6.1.4.1.4458.1000.1.5.5
DisplayString
6.6
1.3.6.1.4.1.4458.1000.1.5.5
Integer
7
Integer
8
Release 3.5.70
Description
RO
An indication of the vaildity of the channel's
data. If the channel was scanned the data is
valid, else not.
RO
Channel last scan timestamp in hundredths of a
second since device up time. If the channel
was not scanned than the return value will be 0.
RO
Normalized Noise Floor value in dBm ‐ of
Antenna A ‐ (including 2 neighbor frequencies).
RO
Normalized Noise Floor value in dBm ‐ of
Antenna B ‐ (including 2 neighbor frequencies).
RO
Average normalized Noise Floor value in dBm ‐
of Antenna A ‐ over all dwells.
RO
Average normalized Noise Floor value in dBm ‐
of Antenna B ‐ over all dwells.
RO
Max normalized Noise Floor value in dBm ‐ of
Antenna A ‐ over all dwells.
RO
Max normalized Noise Floor value in dBm ‐ of
Antenna B ‐ over all dwells.
RO
Was CAC performed on the channel.
RO
Last CAC performed timestamp in hundredths
of a second since device up time. If no CAC has
performed on the channel the return value will
be 0.
RO
Was Radar detected on the channel.
RO
Last Radar Detection timestamp in hundredths
of a second since device up time. If no Radar
has detected on the channel the return value
will be 0.
RO
Is the channel available for use.
RO
The max RSS value of a received beacon on the
specific channel in dBm.
RO
Compress all the Spectrum data per channel
into one variable. Frequency (4 bytes)
Scanned (1 byte) Timestamp (4 bytes) Last NF
Antenna A (1 byte) Last NF Antenna B (1 byte)
Avg NF Antenna A (1 byte) Avg NF Antenna B (1
byte) Max NF Antenna A (1 byte) Max NF
Antenna B (1 byte) CAC Performed (1 byte)
Last CAC Timestamp (4 bytes) Radar Detected
(1 byte) Radar Detected Timestamp (4 bytes)
Channel Available (1 byte) Max Beacon RSS (1
byte).
RO
The minimum and maximum frequencies in
MHz which the chip supports.
RW Spectrum analysis timeout in seconds.
RO
Description: Antenna configuration and Rates
status (1 = Single antenna with single data
stream 2 = Dual antenna with single data
stream 3 = Dual antenna with dual data
stream).
RW Description: Transmission type when using Dual
radios (MIMO or AdvancedDiversity using one
stream of data).
Chapter C
C‐17
Need help?
Do you have a question about the 2000 C PLUS and is the answer not in the manual?