Chapter 20: Using The Web Interface; What Is It For; Who Needs It; How It Works - Radwin 2000 C PLUS User Manual

Chapter 20:
Using the Web Interface
What is it For
The Web Interface (WI) enables you to carry out basic link management functions using a
Web browser.
It may be used to ‐
• Monitor a link on a minimal basis
• Check link parameters and make limited changes
• View the link Inventory
• Inspect the Recent Events logs
Who Needs it
The WI is a tool for technicians to "quick‐install" an ODU in a link with minimum effort.
It may also be employed by a user for a quick look at current operating parameters and the
Recent Events logs.
How it Works
Assume the link setup, which we used in
On the managing computer, point your browser to10.104.4.2 and log on as shown below. You
can also log on over the air to the Slave ODU in the same way.
For stand‐alone or unregistered ODUs, you must connect a managing computer directly to
the ODU and again log on as shown below.
RADWIN 2000 C Plus User Manual
and later.
Link Configuration
Release 3.5.70 20‐1