Private MIB Parameters
Table C‐2: Private MIB Parameters (Sheet 3 of 32)
Name
winlink1000OduAdmActualConnect
Mode
winlink1000OduAdmAES256Suppor
t
winlink1000OduAdmAES256State
winlink1000OduAdmAES256Status
winlink1000OduAdmBatterySavingS
hutdownTime
winlink1000OduAdmWiFiPowerMo
de
winlink1000OduAdmShutdownTim
er
winlink1000OduAdmGPSState
winlink1000OduAdmTemperatureC
winlink1000OduSrvMode
winlink1000OduSrvBridging
winlink1000OduSrvRingLinkMode
winlink1000OduSrvRingTopologySu
pported
winlink1000OduSrvRingVlanIdTable
winlink1000OduSrvRingVlanIdEntry
winlink1000OduSrvRingVlanIdIndex
winlink1000OduSrvRingVlanId
winlink1000OduSrvRingEthStatus
winlink1000OduSrvRingMaxAllowe
dTimeFromLastRpm
winlink1000OduSrvRingWTR
winlink1000OduSrvQoSMode
winlink1000OduSrvQoSConfTable
winlink1000OduSrvQoSConfEntry
winlink1000OduSrvQoSConfIndex
winlink1000OduSrvConfVlanQGrou
ps
winlink1000OduSrvConfDiffservQGr
oups
winlink1000OduSrvConfQueMir
winlink1000OduSrvConfQueWeight
winlink1000OduSrvQoSVlanQGroup
sSetStr
RADWIN 2000 C Plus User Manual
OID
Type
1.3.6.1.4.1.4458.1000.1.1.3
Integer
6
1.3.6.1.4.1.4458.1000.1.1.3
Integer
7
1.3.6.1.4.1.4458.1000.1.1.3
Integer
8
1.3.6.1.4.1.4458.1000.1.1.3
Integer
9
1.3.6.1.4.1.4458.1000.1.2.1
Integer
1.3.6.1.4.1.4458.1000.1.2.3
Integer
Release 3.5.70
Description
RO
Unit connected as part to ptp or ptmp.
RO
AES‐256 security support indication.
RW Enable/Disable AES‐256 security mode over the
air link.
RO
AES256 operating status
RW Battery Saving Shutdown Time in minutes 0 till
battery run out ‐1 if not supported.
RW WIFI unit power mode.
RO
Shutdown Timer in seconds.
RO
GPS state
RO
The temperature (Celsius) inside the Board.
RW System mode. The only values that can be set
are installMode and slaveMode; normalMode
reserved to the Manager application provided
with the product. A change is effective after
link re‐synchronization.
RO
Bridging Mode. Valid values are: disabled (0)
enabled (1).
RW Mode of the link regarding ring topology.
RO
Ring Topology options are: supported not
supported
N/A Ring VLAN IDs table.
N/A VLAN ID of the internal ring messages. Valid
values are 1 to 4094. Initial value is 0 meaning
VLAN unaware. INDEX {
winlink1000OduSrvRingVlanIdIndex }
RO
Index of VLAN ID of the internal ring messages.
RW VLAN ID of the internal ring messages. Valid
values are 1 to 4094. Initial value is 0 meaning
VLAN unaware.
RO
Represents the Ethernet service blocking state
of a Rings link
RW Defines the minimal time (in ms) required for
determination of ring failure.
RW Defines the minimal time (in ms) required for
ring recovery.
RW Mode of QoS feature.
N/A QoS configuration table.
N/A QoS configuration table. INDEX {
winlink1000OduSrvQoSConfIndex }
RO
Index of QoS Configuration.
RO
Frames classification according to VLAN Priority
IDs.
RO
Frames classification according to Diffserv.
RW Desired Private MIR.
RW QoS queueu's weights in percent.
RW Frames classification according to VLAN IDs
string for set.
Chapter C
C‐8
Need help?
Do you have a question about the 2000 C PLUS and is the answer not in the manual?