Figure 7-11 Date And Timec; Figure 7-12 Change Date And Figure 7-13 Setting Ethernet - Radwin 2000 C PLUS User Manual

Management
Figure 7‐11: Date and Time Configuration
3. If entering an IP address for the NTP Server, click Clear, and then enter the new
address.
4. Set your site Offset value in minutes ahead or behind GMT
5. To manually set the date and time, click Change and edit the new values.
Figure 7‐12: Change Date and Time
6. Click OK to return to the Configuration dialog.
1. Greenwich Mean Time
RADWIN 2000 C Plus User Manual Release 3.5.70
Chapter 7
1
.
7‐15