Getting Started With The Radwin Manager 5 - Radwin 2000 C PLUS User Manual

Getting Started with the RADWIN Manager

To install the RADWIN Manager application:
1. Insert the CD into the CD/DVD drive of your computer.
2. The CD opening window appears:
3. Choose Install RADWIN Manager and follow the on‐screen instructions of the
installation wizard to complete the setup of the RADWIN Manager application.
If the installation program fails to start, browse to your CD/DVD drive, chose the
setup.exe program and run it.
Getting Started with the RADWIN Manager
Preparation for First Log‐on

To start the RADWIN Manager:
1. Connect the managing computer to PoE LAN port of the ODU intended as Master
ODU
2. The default IP address on all new radios is 10.0.0.120 with subnet mask, 255.0.0.0.
Set your network interface to an available IP address on that subnet, say 10.0.0.111.
This is the preferred way of logging on.
3. Check that you have connectivity to the ODU. You can do this by opening up a
command line session (Start|Run and then type, cmd). At the command prompt,
type
RADWIN 2000 C Plus User Manual Release 3.5.70
Chapter 5
5‐2