Downloading/Uploading The System Message File; Message Menu) - Denso BHT-604Q User Manual

4.5.13 Downloading/Uploading the System Message File

( SYSTEM MESSAGE Menu)
The system message file is a file (file name: "_B60MSG.FN4") used by the system to display messages
such as "shutdown in progress. Do not remove the battery." or "Charge th
D ownloading/Uploading the System Message File
(1) Upload the system me
(2) Download the uploaded system mess

U ploading the System Message File
Create a system message file based on the curre
computer and so on. After uploading, delete the created system message file.
 Downloading
Receive the system message file from the host computer and so on to which it was backed up, and after
setting the stored system messages, delete the received system message file.
The communication parameters, communicatio
c ommunication environment" in section "4.5.5 System Environment Settings" are used when uploading
a nd downloading.
System messages are normally set when the BHT is shipped from the factory, and
- Supplement -
therefore operation at this menu is unnecessary.
Use the following procedure to download and upload the system message file.
1.
Press the 6 key while holding down the SF key at the SYSTEM MENU.
The SYSTEM MESSAGE menu displays as shown on the right.
[1: Download]:
Downloads the system message file.
[2: UPLOAD]:
Uploads the system message file.
Refer to the following section for details of the above items.
Press the C key to return to the SYSTEM MENU.
ssage file to the host computer and so on.
age file at another BHT.
the system message file
2D Code Handy Terminal
e ba
nt system message settin
n protocol, and interface set at "[5] Setting the
ttery!".
gs and upload it to the host
127