Denso BHT-604Q User Manual page 70

BHT-604Q
4.
By executing the BHT-BASIC 4.0 Transfer Utility or similar program, the
screen displays as shown on the right and file uploading is commenced.
(Refer to the "BHT-BASIC4.0 Transfer Utility User's Guide.")
5.
The screen screen displays as shown on the right during uploading.
The screen screen displays as shown on the right indicating the file name
and the number of sent records/the total number of records.
(When using the Ymodem protocol, the sent file size/the total file size
(units: KB) displays.)
Press the C key to abort the download process and return to the UPLOAD
menu.
6.
When uploading is complete, the beeper sounds once and the screen
screen displays as shown on the right.
When
the number of sent records equals the total number of records,
downloading is complete.
(When using the Ymodem protocol, the sent file size equals the total file
size.)
Press the C key to return to the UPLOAD menu.
If "2: ALL FILES" or "3: HT<-->HT COPY" is selected, repeat the above
operation until all files are uploaded.
If an error message displays during uploading, refer to "Chapter 7 Error
Messages".
58