Denso BHT-604Q User Manual page 115

3.
At the slave BHT to be tested, select "1: SLAVE", and at
BHT, select "2: MASTER". Then press the ENT key.
The screen displays as shown on the right during the test, and an infrared
commu nication test is performed.
If an error occurs, the tested slave BHT beeps three times and displays the
s creen on the right.
The meanings of the error codes in p
( X X )
1: The received data is different from the sent data.
2: A timeout has occurred during standby for data
1: 9600 bps
2: 115200 bps
3: 460800 bps
P ress the C key to return to the TEST COMMUNICATION menu.
T he master BHT automatically returns to the TEST COMMUNICATION menu 10 seconds after the
o ccurrence of an error.
U pon normal completion of the test, the tested slave BHT beeps once and
displays the screen on the right.
Press the C key to return to the TEST COMMUNICATION menu.
The master BHT aut
menu.
arentheses are as follows.
reception.
omatically returns to the TEST COMMUNICATION
2D Code Handy Terminal
the master
103