Denso BHT-604Q User Manual page 15

 Host computer
Allows you to edit, manage and download user programs and data, as well as downloading system
programs.
Models : PC/AT Compatible
Operating Systems and Optional Application Programs
Operating Systems (OS)
BHT-BASIC4.0 Development Pack
BHT-BASIC4.0 Transfer Utility*
 CU-600 Series (Option)
Used for communication between the BHT and host computer.
Communication with the BHT is performed by IrDA communication, and communication with the host
computer is performed with an RS-232C, Ethernet or USB interface.
The following three types of CU are available depending on the interface used to communicate with the
host computer.
 CU-601: RS-232C interface
 CU-611: Ethernet
 CU-621: USB interface
 Connection Cable (Option or Commercially Available Product)
Used to connect the host computer and CU-600 Series.
Select a cable suited to the CU-600 Series interface being used.
Supported CU-600 Series Cables
 CU-601:
RS-232C cable (Option)
 CU-611:
Ethernet (10BASE-T) cable (commercially available product)
 CU-621:
USB cable (Option)
Furthermore, by preparing the BHT connector interface and cable suited to each connection port,
connection is also possible between the BHT and host computer, between the BHT and modem, and
between BHT units.
Please note, however, that the BHT connector interfaces have not been designed for frequent cable
insertion and removal and therefore use of the CU-600 Series is recommended.
* Refer to "Chapter 8 Specifications" for further details on BHT interfaces.
 BHT-BASIC 4.0 Development Pack (Option) and BHT-BASIC 4.0 Transfer Utility
(Option)
Refer to "Software Configuration" on the following page.
Windows NT
Windows 98
3.51/4.0
– –
 
*This application does not activate any built-in IrDA interface port.
2D Code Handy Terminal
Windows 2000
Windows XP
Professional
 
 
3