Denso BHT-604Q User Manual page 172

BHT-604Q
Barcodes
Supported Barcode Types
Universal product codes
EAN-13 (JAN-13)
EAN-8 (JAN-8)
UPC-A
UPC-E
Interleaved 2of5 (ITF)
Codabar (NW-7)
Code 39
Code 128（EAN-128）
RSS-14 (GS1 DataBar)
Note: These specification values all apply to ambient illuminance of 500 to 3,000 Lx.
(xenon lamp light source)
Multiline codes
Multiline reading can be performed up to a maximum of 3 lines at a time in the specified order on the
following codes: Universal product codes, Interleaved 2of5 (ITF), Codabar (NW-7), Code 39, Code93,
Code 128 (EAN-128).
This can only be specified with application programs. Refer to BHT-BASIC Programming Manual (BHT
Series).
Required Optical Properties
White bars: Reflection intensity of 45% or higher
Black bars: Reflection intensity of 25% or lower
PCS value of 0.45 or higher
The reflection intensity is regulated with a light source with spectral peak of 650 nm and spectrum
range of 610 to 700 nm.
160
Bar Dimensions
0.26 to 0.50 mm
0.26 to 0.66 mm
0.26 to 0.50 mm
0.26 to 0.66 mm
Min. 0.15 mm
Scan Magnification
0.8 to 1.5 times
0.8 to 2.0 times
0.8 to 1.5 times
0.8 to 2.0 times
2 to 46 digits
*
3 to 30 digits
1 to 24 digits
1 to 19 digits
14 digits
* Even number digits only