Denso BHT-604Q User Manual page 116

BHT-604Q
 Connector communication Test
1.
Wire the cable with JC-25-P-3 (2.5mm stereo mini-
BHT connector communication port.
2.
Select "2: CONNECTOR" at the TEST COMMUNICATION menu and then
p ress the ENT key.
T he TEST COMMUNICATION screen displays as shown on the right.
If an error occurs, the BHT beeps three times and displays the screen on
the right.
The meanings of the error codes in parentheses are as follows.
( X X )
1: 300 bps
2: 115200 bps
Press th e C key to return to the TEST COMMUNICATION menu.
U pon normal completion of the test, the BHT beeps once and displays the
s creen on the right.
P ress the C key to return to the TEST COMMUNICATION menu.
104
1: The received data is different from the sent data.
2: A timeout has occurred during standby for data
reception.
plug) as shown below and connect to the