Denso BHT-604Q User Manual page 119

2d code handy terminal
Table of Contents

Advertisement

Upon completion of the PING test, the screen displays as shown on the
right.
The PING result may include the following:
OK:
Displays the number of echo replies.
[X
XXXX]:
Echo reply time in milliseconds
NG:
Displays the number of erro
TIMEOUT: Displays the number of timeouts (for echo replies) th
place during the PING test.
IP
:
Displays the BHT IP address during the PING test only.
M ssages displayed during PING test (display
e
Waiting:
Setting up the PING test.
Opening device:
Opening devices.
Routing TCP/IP:
Connecting to the TCP/IP communication pathway.
PING start:
Starting the PING tes
Device error:
Faiindicator LED to o
TCP/IP error:
Failed to connect to the TCP/IP communication pathway.
PING t
ermination messages (displayed at bottom of screen)
PING end:
The PING test has ended normally.
PING aborted:
The PING test has been aborted.
PING error:
An error has occurred during the PING test.
rs found during the PING test.
at took
ed in center of screen)
t.
pen a device.
2D Code Handy Terminal
107

Advertisement

Table of Contents
loading

Table of Contents