Denso BHT-604Q User Manual page 143

 When the Displayed File Name Differs from the BHT Sys
If the name of the file displayed at [2: FILENAME] differs from the name of the BH
be used for updating the system, enter the correct f
1.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2: FILENA E] and then press the ENT
key.
T he mode changes to entry mode and the cursor displays.
2.
Use the numerical keys and dot key to enter the c
Press the SF and the BS key to change the entry mode (num
entry).
T o delete a s ingle character, press the BS key.
P ress the C key to delete all entries made.
3.
P ress the ENT key to set the entered file name.

If the System Update File Does not Exist when Updating th
The screen displays as shown on the right If the system upda
not exist when updating the BHT system.
Download the BHT system update file and update the BHT system
Press the C key to return to the MODIFY MENU.
2D Code Handy Terminal
tem Update File
ile name.
M
orrect file name.
eric entry (no gui dance display) and alphabet
e BHT System
te file does
again.
T system update file to
131