Denso BHT-604Q User Manual page 91

[6] Defining the functions of the Shift key and Magic keys
Use the following procedure to change the key settings.
1.
Select "6: KEY" at the SET SYSTEM menu and then press the ENT key.
The SET KEY menu screen displays as shown on the right.
2.
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4] [5] [6] [7]) to
highlight the item to be set, and then press the ENT key.
"1: SHIFT KEY": Displays the SF key definition screen.
"2: M1 KEY": Displays the M1 key definition screen.
"3: M2 KEY": Displays the M2 key definition screen.
"4: M3 KEY": Displays the M3 (left-hand trigger switch) key definition
screen.
"5: M4 KEY": Displays the M4 (right-hand trigger switch) key definition
screen.
"6: M5 KEY": Displays the M5 key (
"7: M6 KEY": Displays the M6 key (
Refer to the following section for details of the above items.
Press the C key to return to the SET COMMUNICATION menu.

"1:SHIFT KEY": Defining the Shift key function
1.
Select "1: SHIFT KEY" at the SET KEY menu and then press the ENT key.
The SET SHIFT KEY menu screen displays as shown on the right.
The highlighted settings will be the current settings.
"1: Nonlock": Shifts the keypad only when the SF key is held down.
"2: Onetime": Shifts only the key pressed immediately after the SF key is
pressed. (The following keys will not be shifted.)
2.
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2]) to highlight the item
to be set, and then press the ENT key.
The selected item will be set and the screen will return to the SET KEY menu.
) definition screen.
) definition screen.
2D Code Handy Terminal
79