Table of Contents
Advertisement
BHT-604Q
Setting the FTP
1.
Select "2: SET FTP" at the SET TCP/IP menu and then press the ENT key.
The SET FTP menu screen displays as shown on the right.
2.
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2]) to highlight the
item to be set, and then press the ENT key.
Press the C key to return to the SET TCP/IP menu.
"1: SERVER": Setting the FTP server connection environment
Select "1: SERVER" at the SET FTP menu to display the screen on the right
where the current settings are displayed.
"1: SERVER IP":
Sets the IP address for the FTP server.
"2: USER ID":
Sets the user name.
"3: PASSWORD":
Sets the password.
"4: DEFAULT DIR":
Specifies an initial directory through which the FTP server will search for
files for transfer first when the FTP client establishes a connection to the
server.
To change the setting:
(1)
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4]) to
highlight the item to be set and press the ENT key.
(2)
The mode changes to entry mode and the cursor displays, allowing
the setting to be entered with the numerical keys and dot key.
Press the SF and the BS key to change the entry mode (numeric
entry (with no guidance display) and alphabet entry).
To delete a single character, press the BS key. To delete the entire
entry, press the C key.
(3)
Enter the desired value, and then press the ENT key.
Press the C key to return to the SET FTP menu.
84
Advertisement
Chapters
Table of Contents
