Table of Contents
Advertisement
BHT-604Q
Message
152
BHT Response
If this error occurs, the BHT
beeps five times.
The message continues to
display.
If this error occurs, the BHT
beeps five times and then turns
itself off.
Cause
During execution of System
Program, the System Program
has received an invalid
command code.
(xxxxxxxx: Error address)
When the BHT is turned on, no
user programs are found.
Any of the hardware error,
memory error and execution
program error has occurred.
(XXXX: Error code)
Countermeasure
Unload and reload the battery
cartridge, then turn the BHT on.
If this error occurs frequently,
make a note of the displayed
message and codes and
contact your system
administrator. Contact your
system administrator.
Contact your system
administrator.
You can run the code scanning
demo without user programs.
Pressing "1:Yes" runs the code
scanning demo.
Press the trigger switch to start
the code scanning demo.
Selecting "2:No" turns the
power off.
Turn the BHT on again. If this
error occurs frequently, make a
note of the displayed code and
contact your system
administrator.
Advertisement
Chapters
Table of Contents
