Denso BHT-604Q User Manual page 120

BHT-604Q

"2: SET PING" (PING Options Setting Screen)
1.
S elect "2: SET PING" at the TEST PING menu and then press the
E NT key.
The current settings are displayed.
[1: DESTINATION IP]:
Specifies the IP address of the host computer to be pinged.
[2:DATA SIZ E]:
Specifies the data size of the echo request.
[3 :INTERVAL]:
Specifies the echo request interval (in units of 100 ms).
[4:TIMEOUT]:
Specifies th
[5 :COUNT]:
Specifies the number of echo requests to be sent.
[6:SEND TYPE]:
Selects the ec
(Refer to "PING Echo Request Transmission Timing (SEND TYPE)" on the fol
2.
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4] [5
then press the ENT ke
Th e mode chan
U s e the cursor keys ([ ] [►]) to highlight the "6: SEND TYPE" setting.
3.
Enter the setting values with the numerical keys and dot key.
Use the cursor keys ([◄] [►]) to select "6: SEND TYPE" setting.
To delete a single character, press the BS key.
Press the C key to delete all entries made.
4.
Enter the setting values and then press the ENT key.
Press the C key to return to the TEST PING menu.
Entry Range for DATA SIZE, INTERVAL, TIMEOUT, and COUNT
Item
DATA SIZE
INTERVAL
TIMEOUT
COUNT
◆Specifying zero (0) will set the number of echo requests to "infinite," meaning that echo requests will be
sent continuously until the PING test is aborted.
If a value outside the allowable entry range listed above is specified, the nearest value within the range
will automatically be applied.
108
e timeou t period (in units of 100 ms
ho request send timing (TYPE 1 or TYPE 2).
y.
ge s to entry mode and the cursor displays.
◄
Allowable Entry range
) for the echo request.
] [6]) to highlight the item to be set, and
4 to 1472
0 to 65535
0 to 65535
0* to 65535
lowing page for details.)
Default
56
10
10
4