To System Designers; Handling The Bht - Denso BHT-1200 Series Operator's Manual

To System Designers:

When introducing BHT in those systems that could affect human lives (e.g., medicines
management system), develop applications carefully through redundancy and safety design
w hich avoids the feasibility of affecting human lives even if a data error occurs.

Handling the BHT

Incorrect handling of the BHT could cause electric shock, impaired vision, skin
problems, injury, burns and generation of heat and smoke from the BHT. Be sure
to observe the following to use the device correctly.
 Never put the BHT into a microwave oven or high-pressure container.
Doing so could cause the BHT to break, generate heat, rupture or burn.
 Never put the BHT in places where there are excessively high temperatures, such as inside
closed-up automobiles, or in places exposed to direct sunlight.
Doing so could affect the housing or parts, resulting in a fire.
 Avoid using the BHT in extremely humid or dusty areas, or where there are drastic temperature
changes.
Moisture or dust will get into the BHT, resulting in malfunction, fire or electrical shock.
 If smoke, abnormal odors or noises come from the BHT, immediately turn off the power, pull out
the battery, and contact your nearest dealer.
Failure to do so could cause smoke or fire.
 If you drop the BHT so as to damage its housing, immediately turn off the power, pull out the
battery.
Failure to do so could cause smoke or fire.
 Do not use batteries or power sources other than the specified ones.
Doing so could generate heat or cause malfunction.
 Never disassemble or modify the BHT; doing so could result in an accident such as break or fire.
 Do not insert foreign materials in the BHT.
 If foreign material or water gets into the BHT, immediately turn off the power, pull out the battery,
and contact your nearest dealer.
Failure to do so could cause smoke or fire.
 If the LCD breaks and the liquid leaks from the LCD by mistake, do not swallow, inhale or touch
it.
 Do not place the RF tag read antenna of the BHT within 22 cm from the mounting location of an
embedded medical device (a cardiac pacemaker, etc.). For more information, see the web site
of the Ministry of Internal Affairs and Communications.