Denso BHT-604Q User Manual page 118

BHT-604Q
[9] PING test
Use the following procedure to run the PING test.
1.
Select "9: PING" at the TEST menu and then press the ENT key.
The TE ST PING screen displays as shown on the right.
"1: RUN PING":
"2: SET PING":
"3: SET DEVICE": Dis
Refer to the following section for details of the above items.
Press the C key to return to the TEST menu.

"1: RUN PING" (PING Test Scre
1.
Select "1: RUN PING" at the TEST PING menu and then press the
key.
The cur rent setting values display, and the BHT waits for the transmission
count to be entered.
T o change the number of echo requests displayed, enter the desired value
u sing the numerical keys.
To delete a single character, press the BS key.
Press the C key to delete all entries made.
2.
Press the EN T key
When the PING test starts running, the message shown
on the right.
Press the C key to
106
Runs the PING test.
Displays the PING parameter setting screen.
plays the PING device setting screen.
en)
.
abo t rt he P I NG te st.
ENT
disp lays as sh own