Table of Contents
Advertisement
"2: IP ADDRESS": Setting the IP address
Select "2: IP ADDRESS" at the SET TCP/IP menu to display the screen on
the right where the current settings are displayed.
To change the setting:
(1)
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3]) to
highlight the item to be set and press the ENT key.
(2)
The mode changes to entry mode and the cursor displays, allowing
the setting to be entered with the numerical keys and dot key.
To delete a single character, press the BS key. To delete the entire
entry, press the C key.
(3)
Enter the desired value and then press the ENT key
If the IP address, subnet mask and default gateway are all set to [0.0.0.0], DHCP is enabled.
Press the C key to return to the SET TCP/IP menu.
"3: TIMEOUT": Setting the timeout (only when COM1 selected)
Select "3: TIMEOUT" at the SET TCP/IP menu to display the screen on the
right where the current settings are displayed.
To change the setting:
(1)
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4] [5]) to
highlight the item to be set and press the ENT key.
(2)
The mode changes to entry mode and the cursor displays, allowing
the setting to be entered with the numerical keys and dot key.
To delete a single character, press the BS key. To delete the entire
entry, press the C key.
(3)
Enter the desired value, and then press the ENT key.
Pre
ss th
e C key to return to the SET TCP/IP menu.
2D Code Handy Terminal
83
Advertisement
Chapters
Table of Contents
