Denso BHT-604Q User Manual page 163

Message BHT Response
The date and time settings
screen displays, awaiting entry.
The message continues to
display.
If this error occurs, the BHT
beeps five times.
2D Code Handy Terminal
Cause
The calendar clock integrated in
the BHT has stopped because:
- the battery cartridge had been
removed for a long time.
- the battery cartridge had not
been recharged for a long
time.
After shut down abnormally, the
BHT has been left without the
battery cartridge loaded, or with
discharged battery cartridge
loaded, so unsaved data was
lost.
During execution of System
Program, the System Program
has attempted to write onto the
write-protected area of the
memory.
(xxxxxxxx: Error address)
Countermeasure
Set the current date and
time.(Refer to "Chapter 2 BHT
Preparation" – "2.4 Initial
Setup")
Contact your system
administrator.
Unload and reload the battery
cartridge, then turn the BHT on.
If this error occurs frequently,
make a note of the displayed
message and codes and
contact your system
administrator. Contact your
system administrator.
151