Viewing Ospf Neighbors - Avaya 8800 Configuration Manual

OSPF configuration using the CLI
Prerequisites
• OSPF is globally enabled.
• The interface is assigned an IP address.
• The interface is designated NBMA.
Procedure steps
1. To create an NBMA OSPF neighbor, enter the following command:
2. Ensure that the configuration is correct by entering the following commands:
Variable definitions
Use the data in the following table to help you use the commands:
• config ip ospf neighbor <ipaddr>
• config ip vrf <vrfName> ospf neighbor <ipaddr>
create <priority>
delete
info
priority <priority>

Viewing OSPF neighbors

View OSPF neighbors for administrative or troubleshooting purposes.
180 Configuration — OSPF and RIP
config ip ospf neighbor <ipaddr> create <priority>
config ip ospf neighbor <ipaddr> info
show ip ospf neighbors
Variable
Creates an OSPF neighbor and assigns a priority level.
<priority> is a value from 0 to 255.
Deletes an OSPF NBMA neighbor.
Displays information about the OSPF neighbor settings.
Changes the priority level of the neighbor. <priority> is a
value from 0 to 255.
Value
June 2011