Viewing The Ospf Link-State Database - Avaya 8800 Configuration Manual

OSPF configuration using the ACLI
Variable definitions
Use the data in the following table to help you use the accept adv-rtr <A.B.C.D>
command.
<A.B.C.D>
enable
metric-type <type1|type2|
any>
route-policy <WORD 0-64>

Viewing the OSPF link-state database

View the area advertisements and other information contained in the link-state database (LSD)
to ensure correct OSPF operations.
Prerequisites
Access Privileged EXEC mode.
Procedure steps
To view the OSPF link-state database, enter the following command:
show ip ospf lsdb [area <A.B.C.D>] [lsatype <0-7>] [lsid
<A.B.C.D>] [adv_rtr <A.B.C.D>] [vrf <WORD 0-64>] [vrfids
<0-255>] [detail]
Variable definitions
Use the data in the following table to help you use the show ip ospf lsdb command.
218 Configuration — OSPF and RIP
show ip ospf accept
Variable
Specifies the IP address.
Enables an OSPF acceptance policy.
Configures the metric type as Type 1, Type 2, or any.
Configures the route policy by name.
Value
June 2011