2. Configure RIPv2 send and receive modes for VLAN 3.
3. Configure RIPv2 send and receive modes on the brouter port.
Configuration — OSPF and RIP
ERS-8606:5# config ip rip interface 10.1.20.2 send-mode rip2
ERS-8600:5# config ip rip interface 10.1.20.2 receive-mode
rip2
ERS-8606:5# config ip rip interface 10.1.30.2 send-mode rip2
ERS-8600:5# config ip rip interface 10.1.30.2 receive-mode
rip2
ERS-8606:5# config ip rip interface 10.1.1.1 send-mode rip2
ERS-8606:5# config ip rip interface 10.1.1.1 receive-mode
rip2
Configuration example for RIPv2
June 2011
97