Avaya 8800 Configuration Manual page 152

OSPF configuration using the CLI
config ip ospf interface <ipaddr>
config ip ospf neighbor <ipaddr>
config ip ospf redistribute apply
config ip ospf redistribute <ospf|
bgp|static|direct|rip>
152 Configuration — OSPF and RIP
Command Parameter
delete
info
add-message-digest-key <md5-key-id> md5-key
<value>
admin-status <enable|disable> [<if-type>]
area <ipaddr>
authentication-key <authentication-key>
authentication-type <auth-type>
bfd <enable|disable>
change-primary-md5-key <md5-key-id>
create [<if-type>]
dead-interval <seconds>
delete
delete-message-digest- key <md5-key-id>
hello-interval <seconds>
info
interface-type <if-type>
metric <metric>
mtu-ignore <enable|disable>
poll-interval <seconds>
priority <priority>
retransmit-interval <seconds>
transit-delay <seconds>
create <priority>
delete
info
priority <priority>
apply [vrf-src <value>]
create [vrf-src <value>]
delete [vrf-src <value>]
disable [vrf-src <value>]
June 2011