Kyocera KM-2530 Service Manual page 137

2DF
Maintenance
item No.
U329 Default setting Auto rotation copy/Sort copy
Description
Sets the initial mode for the Auto rotation copy/Sort copy selected when auto clear is triggered or the reset key
is pressed.
Purpose
To be set as required according to the user.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be set.
Setting Auto rotation copy
1. Select ON or OFF.
Initial setting: ON
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Setting Sort copy
1. Select ON or OFF.
Initial setting: ON
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.
U330 Setting the number of sheets to enter stacking mode during sort operation
Description
When sort copying is set to perform automatically in the output form setting of the user simulation, sets the
number of sheets at which the eject location is switched to the optional finisher (only when the finisher is
installed).
Purpose
To be set as required according to the number of copies the user makes.
Method
Press the start key. The current setting is displayed.
Setting
1. Set the number of sheets (o to 250) using the numeric keys or cursor up/down keys.
2. Press the start key. The setting is set. The screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U331 Switching the finisher eject section
Description
Sets whether or not copies made by copying from the original table are ejected face up to the auxiliary tray of
the optional 3000-sheet finisher or booklet stitcher.
Purpose
Select ON to eject copies to the auxiliary tray regardless of the ejection section priority.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select FACE UP ON or FACE UP OFF. The selected item is displayed in reverse.
Display
FACE UP ON
FACE UP OFF
Initial setting: OFF
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item is displayed.
1-4-46 1-4-45-1
Description
Description
To eject copies to the auxiliary tray face up
To eject copies to the eject section with the highest priority