Kyocera KM-2530 Service Manual page 122

Maintenance
item No.
" × × × × × 13" paper
1
U217 Setting 8 /
2
Description
Turn on the setting when using 8
Purpose
To change the setting as needed.
Method
Press the start key. The screen for selscting an item is displayed.
Setting
1. Select ON or OFF. The selected item is displayed in reverse.
Display
ON
OFF
2. Press the start key. The value is set. The screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U236 Setting the limit for the ejection section of the built-in finisher
Description
If the machine is equipped with an optional built-in finisher, this mode sets whether A5/5
output to the machine internal tray or not.
Purpose
If the machine is equipped with an optional built-in finisher and if paper jams occur due to curling of paper in the
built-in ejection section when two-sided copying onto A5/5
to change the setting to ON to disable ejection to the machine internal tray.
Method
Press the start key. The screen for executing is displayed.
Setting
1. Select ON or OFF. The selected item is displayed in reverse.
Display
ON
OFF
Initial setting: OFF
2. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selectiong a maintenance item No. is displayed.
Description
" × 13" paper.
1
/
2
Description
" × 13" paper is used.
1
8 /
2
" × 13" paper is not used.
1
8 /
2
Description
Does not eject to the machine internal tray.
Eject to the machine internal tray.
× 8
1 1
/ / size paper is performed, this mode is used
2 2
2DF
× 8
1 1
/ / size paper is
2 2
1-4-35