Kyocera KM-2530 Service Manual page 32

2DF
Manual exposure adjustment (Mixed)
Adjusts the exposure to be used when text and
photo original is selected for the image mode.
1. Select "Manual exp. adj. (Mixed)" and press
the [Change #] key.
2. Press the [Lighter] or [Darker] key to adjust
default setting of copy exposure.
Setting range: -3 to +3
Manual exposure adjustment (Text)
Adjusts the exposure to be used when text
original is selected for the image mode.
1. Select "Manual exp. adj. (Text)" and press the
[Change #] key.
2. Press the [Lighter] or [Darker] key to adjust
default setting of copy exposure.
Setting range: -3 to +3
Manual exposure adjustment (Photo)
Adjusts the exposure to be used when photo
original is selected for the image mode.
1. Select "Manual exp. adj. (Photo)" and press the
[Change #] key.
2. Press the [Lighter] or [Darker] key to adjust
default setting of copy exposure.
Setting range: -3 to +3
Margin width
Sets the default setting of the margin width for the
margin copying.
1. Select "Default margin width" and press the
[Change #] key.
2. Press the +/- keys to adjust default margin
width.
Setting range: 0 to 3/4" (inch specifications)
0 to 18 mm (metric specifications)
Border erase width
Sets the default setting of the border erase width
for the border erase mode.
1. Select "Default erase width" and press the
[Change #] key.
2. Press the +/- keys to adjust default erase
width.
Setting range: 0 to 3/4" (inch specifications)
0 to 18 mm (metric specifications)
Copy limit
Sets the number of copies limit for multiple
copying.
1. Select "Preset limit" and press the [Change #]
key.
2. Press the +/- keys to set copy preset in one
job.
Setting range: 1 to 999 copies
1-3-12
Display register key
Sets whether or not to display the Register key in
the copy operation screen.
1. Select "Display register key" and press the
[Change #] key.
2. Select "On" or "Off".
Customize the base screen (main function)
Changes the layout of the main functions of the
base screen.
1. Select "Customize (Main function)" and press
the [Change #] key.
2. Change the layout to press [Move ahead] or
[Move to behind].
Customize the copy operating screen (add function)
Changes the layout of the functions except the
main functions of the copy operating screens.
1. Select "Customize (Add function)" and press
the [Change #] key.
2. Change the layout to press [ ← ].