Kyocera KM-2530 Service Manual page 56

2DF
• If the printing system is installed
9. Remove the 2 screws holding the printer
system in place, and pull the printing system
out of the shield cover.
10. Remove 13 screws and take off the shield
cover.
11. Move the film out of the way to the left, and
fasten the fax board into place using six M3 ×
06 chrome binding screws.
1-3-36
Printer system
Screws
Figure 1-3-67
Figure 1-3-68
Fax board
Film
Figure 1-3-69
Shield cover
Screws
M3 × 06 chrome
binding screws