Kyocera KM-2530 Service Manual page 123

2DF
Maintenance
item No.
U237 Setting finisher stack quantity
Description
Sets the number of sheets of each stack on the main tray and on the intermediate tray in the optional finisher.
Purpose
To change the setting when a stack malfunction has occurred.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be set. The selected item is displayed in reverse.
Display
MAIN TRAY
MIDDLE TRAY
Setting the number of sheets of stack on the main tray
1. Change the setting using the cursor up/down keys.
Setting
0
1
Initial setting: 0
2. Press the start key. The setting is set.
Setting the number of sheets of stack on the intermediate tray for sort copying or staple copying
1. Change the setting using the cursor up/down keys.
Setting
0
1
Initial setting: 0
2. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selectiong a maintenance item No. is displayed.
1-4-35-1 1-4-36
Description
Description
Number of sheets of stack on the main tray
Number of sheets of stack on the intermediate tray for sort
copying or staple copying
Description
3000-sheet finisher: 3000 sheets, built-in finisher: 500 sheets
3000-sheet finisher: 1500 sheets, built-in finisher: 250 sheets
Description
For sort copying: 30 sheets, for staple copying: 50 sheets
For sort copying: 30 sheets, for staple copying: 30 sheets