Kyocera KM-2530 Service Manual page 143

2DF
Maintenance
item No.
U500 Setting the limit on data size for email transmission
Description
Sets the limit on the amount of data (number of originals) sent via email from the optional network scanner.
Purpose
To change the setting according to the network environment.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the desired transmission capacity. The selected item is displayed in reverse.
Display
LITTLE
MEDIUM
LARGE
UNLIMITED
Initial setting: LITTLE
2. Press the start key. The value is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U501 Setting image area
Description
Implements the command to cut the area around the image when sending image data to the optional network
scanner.
Purpose
To disable image cut.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select ON or OFF. The selected item is displayed in reverse.
Display
ON
OFF
Initial setting: ON
2. Press the start key. The value is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
1-4-49-1 1-4-50
Description
Setting
512 K bytes
51024 K bytes
2048 K bytes
999 number-of-sheets restrictions
Setting
Cuts the image area (6.5 mm)
Does NOT cut the image area