5
Note the calculated parameters, then press
Refractive Index/Density
To calculate values of refractive index, density, or concentration:
1
Select
Refractive Index/Density
2
Enter the value for one of: refractive index, density, or molarity (see
Figure 2.26 Calculate Refractive Index/Density Screen
3
(
Press
The remaining two parameters are calculated and displayed.
4
Note the calculated parameters, then press
Speed Reduction for Dense Solutions
Reduce run speed when centrifuging a solution with a density greater than the allowable density
rating of the rotor (as listed in the applicable rotor manual) to protect the rotor from excessive
stresses due to the added load.
PN LXP-IM-7AB
from the Calculate menu.
)
.
Calculate
(
)
to close the window.
Close
(
)
to close the window.
Close
Operation
Using Calculation Features
Figure
2.26).
2-29
2