Require User Login; Required Rotor Selection; Enable User Login Option - Beckman Coulter Optima L-XP Instructions For Use Manual

Require User Login

A user may be required to log in prior to starting a run. With each login, the user actions are
recorded in the run log.
To set up required user login:
1
From the System Management screen, check the box next to Require User Login (see
to enable this function.
Figure 2.9 Enable User Login Option
2
Press the

Required Rotor Selection

When Require Rotor Selection is enabled, the user must select a rotor before starting a run. If a rotor
is not selected, the user will be prompted to select the rotor in use.
To select a rotor:
1
From the System Management screen, check the box next to Require Rotor Selection to enable
this function.
2
Press the
PN LXP-IM-7AB
( )
button to exit the System Management screen.
Close
( )
button to exit the System Management screen.
Close
Operation
System-Level Operations
Figure 2.9)
2-11
2