Specifications - YASKAWA v1000 Installation Manual

13 Specifications

13 Specifications
Item
Model
Supported Messages
I/O Assembly Instance
SI-EN3D Specification
SI-EN3D Profile
Connector Type
Physical Layer Type
IP Address Setting
Communication Speed
Number of Connections
Duplex Mode
Address Startup Mode
Ambient Temperature
Humidity
Storage Temperature
Area of Use
Altitude
50
Table 12 Option Specifications
SI-EN3D/V
Explicit: Explicit Class 3, Unconnected
I/O: Class 1, Listen Only, Input Only
Input: 8 types (4 to 44 Bytes)
Output: 8 types (4 to 44 Bytes)
Composite Test Revision: CT11 Passed
AC Drive
RJ45 8-pin Straight Connector STP Cat5e cable
Isolated Physical Layer
TCP Protocol Transformer Isolated
Programmable from drive keypad or network
Programmable from drive keypad or network:
10/100 Mbps, auto-negotiate
I/O: 2
Explicit: 6
Half-forced, Auto-negotiate, Full-forced
Static, BOOTP, DHCP
-10 °C to +50 °C (14 °F to 122 °F)
95% RH or lower with no condensation
-20 °C to +60 °C (-4 °F to +140 °F) allowed for short-term transport of the product
Indoor (free of corrosive gas, airborne particles, etc.)
1000 m (3280 ft.) or lower
YASKAWA TOEP YAICOM 15A V1000 Option Dual-Port EtherNet/IP SI-EN3D/V Installation Manual
Specification