YASKAWA v1000 Installation Manual page 19

Enclosure Type
IP20/Open-Chassis
IP20/NEMA Type 1
Installing the option on an IP20/NEMA Type 1 enclosure drive voids NEMA Type 1 protection while <1>
maintaining IP20 conformity.
3.
For IP20/Open-Chassis models CIMR-VooAooooB, remove the bottom cover of
the drive by applying pressure to the tabs on each side of the bottom cover. Pull the
bottom cover away from the drive while pushing in on the tabs to release the cover
from the drive. Refer to
Refer to Figure 6
4A0001B to 4A0038B, which require removing the terminal cover prior to removing
the bottom cover.
Figure 5 Remove the Bottom Cover on an IP20/Open-Chassis Drive
Terminal Cover
Figure 6 Remove the Terminal Cover and Bottom Cover on an IP20/Open-Chassis
(Models BA0006B to BA0018B; 2A0008B to 2A0069B; 4A0001B to 4A0038B)
YASKAWA TOEP YAICOM 15A V1000 Option Dual-Port EtherNet/IP SI-EN3D/V Installation Manual
Table 5 Installation Steps Based on Drive Model
CIMR-VooAooooB
<1>
CIMR-VooAooooF
Figure 5
for drive models BA0006B to BA0018B, 2A0008B to 2A0069B, and
(Models BA0001B to BA0003B and 2A0001B to 2A0006B)
Drive Model
for details.
Drive
5 Installation Procedure
Proceed to Step
3
6
Bottom Cover
Page
19
20
19