YASKAWA v1000 Installation Manual page 49

Fault
Condition
Default MAC
Address
Two drive monitor parameters, U6-98 and U6-99 assist the user in network troubleshooting.
• U6-98 displays the first declared fault since the last power cycle. U6-98 is only cleared
upon drive power-up.
• U6-99 displays the present option status. U6-99 is cleared upon a network-issued fault reset
and upon power-up.
If another fault occurs while the original fault is still active, parameter U6-98 retains the
original fault value and U6-99 stores the new fault status value.
YASKAWA TOEP YAICOM 15A V1000 Option Dual-Port EtherNet/IP SI-EN3D/V Installation Manual
Fault Declared
None
Status Value
(U6-98/U6-99)
Factory default MAC Address
1103 programmed into the option. Return for
reprogramming.
12 Troubleshooting
Description
49