Product Overview - YASKAWA v1000 Installation Manual

2

Product Overview

u
About this Product
The option provides a communications connection between the drive and an ODVA EtherNet/
IP network. The option connects the drive to an EtherNet/IP network and facilitates the
exchange of data.
This manual explains the handling, installation and specifications of this product.
EtherNet/IP is a communications link to connect industrial devices (such as smart motor
controllers, operator interfaces, and variable frequency drives) as well as control devices (such
as programmable controllers and computers) to a network. EtherNet/IP is a simple, networking
solution that reduces the cost and time to wire and install factory automation devices, while
providing interchangeability of like components from multiple vendors.
EtherNet/IP is an open device network standard.
By installing the option to a drive, it is possible to do the following from an EtherNet/IP master
device:
• Operate the drive
• Monitor drive status
• Change drive parameter settings.
u
Applicable Models
The option can be used with the drive models in
Drive Series
V1000
<1> See "PRG" on the drive nameplate for the software version number.
YASKAWA TOEP YAICOM 15A V1000 Option Dual-Port EtherNet/IP SI-EN3D/V Installation Manual
Table 1 Applicable Models
Drive Model Number
CIMR-VooAoooo
Table 1.
Software Version
2 Product Overview
<1>
1012 and later
9