Receiving - YASKAWA v1000 Installation Manual

3 Receiving

3 Receiving
Please perform the following tasks upon receipt of the option:
• Inspect the option for damage. Contact the shipper immediately if the option appears
damaged upon receipt.
• Verify receipt of the correct model by checking the model number printed on the name
plate of the option package.
• Contact your supplier if you have received the wrong model or the option does not function
properly.
u
Option Package Contents
Description
–
Quantity
u
Tools Required for Installation
A Phillips screwdriver (M3, M3.5 to M6 metric or #1, #2 U.S. standard) is required to install
the option. Screw sizes vary by drive capacity. Select a screwdriver appropriate for the drive
capacity.
Note: Tools required to prepare the option cables for wiring are not listed in this manual.
10
Option Unit Ground Wire
1
YASKAWA TOEP YAICOM 15A V1000 Option Dual-Port EtherNet/IP SI-EN3D/V Installation Manual
Warning Labels
4 1
Installation
Manual
MANUAL
1